The Italian lever par excellence, launched in 1961 and still in production: it is the historical reference for the home lever. Pressure is controlled by hand: it is the machine for those who want to learn to pull the shot by gesture, not by button.
Specifications
| Type | Direct-pressure lever: your arm drives the piston through the whole shot (no electric pump) |
|---|---|
| Group | Own group, dedicated to the line (not E61) |
| Boiler | Brass with level gauge, cup capacity by version (3+ or 8) |
| Heating | Electric |
| Pressure | Applied by hand for the whole shot: pressure follows the force you feel on the lever; no pump, no brew gauge (the steam knob does not measure it) |
| Portafilter | ≈52 mm basket: check accessories against the model, not the nominal diameter |
Description
Lock the portafilter into the group and work the lever: raising the lever lifts the piston and fills the chamber with water above the coffee (pre-infusion); lowering it, your arm pushes that water through the coffee for the entire cycle. The manufacturer manual tells you to store the machine with the lever down (piston at rest low): there is no spring holding the lever up. The profile is yours in the most literal sense: pressure tracks your hand, pre-infusion by holding the lever up, body built by pushing, and every cup depends on your gesture. With 14–16 g of coffee and a 1:2 ratio you extract, indicatively, 28–32 g in 25–30 seconds.
Use and maintenance
It requires practice: the first month is a real learning curve, not a flaw. Rinse the portafilter after every use and run water empty before the first cup; the group gasket suffers the heat of the boiler and must be replaced as soon as it hardens. Descale according to hardness and frequency, with the products the manual allows. Never let the element run on an empty boiler: check the level gauge before every power-on.
The home barista



